SWEP uses cookies to make your visit to our web pages as pleasant as possible. By using our services, we assume that you agree to the use of cookies. Further information on data protection can be found in our privacy policy.

Products

B10T

B10T

The B10T delivers efficient heat exchange solutions across a wide capacity interval, and is quick and simple to adapt for a number of applications. The product’s compact size, versatility, and excellent heat transfer make it a perfect choice for both single-phase and refrigerant applications.

B12

B12

The large-port B12 delivers compact heat transfer solutions for applications with large flows. It is available with different plate patterns to fulfil various thermal duties across a wide range of fluid viscosities and densities. The B12 is an excellent choice for demanding steam and air dryer…

B120T

B120T

The B120T has been specially developed to operate in demanding heating and industrial applications, typically water-water applications and oil coolers. The product has contributed to the rapid switch to BPHEs from traditional gasket plate heat exchangers and shell-and-tube solutions. It is widely…

B16

B16

The B16 has been specially designed for one-phase applications, and has been tailored to cover the capacities and specifications of district heating substations, radiator circuits, and tap water heating applications over a wide capacity range. The B16 is also an excellent choice for oil cooling.

B16DW

B16DW

This double-wall product is designed for applications requiring high thermal efficiency, minimal leakage, and improved leak detection. The design offers the same compactness and thermal performance as other SWEP BPHEs.

B18

B18

With pressure requirements for transcritical CO2 applications touching 140 bar, the B18 is the natural choice. The B18 is optimized for high heat pump capacities (up to 150 kW as a gas cooler and up to 60 kW as an evaporator). The compact yet lightweight B18 is an excellent choice for cold chain…

B30

B30

The B30 is an asymmetric cross-flow heat exchanger. It is particularly suitable for gas-to-liquid applications and for tapping tributary flows from main streams. With 2½″ piping, it handles water flow of up to 58 m³/h (255 gpm). It can be used as a suction gas heat exchanger in chillers of up to 350…

B35T

B35T

The B35T is ideal for many applications in district heating, heat recovery for industry, HVAC, combined heat & power and engine oil cooling. It is the perfect choice for efficient heat transfer with a low pressure drop in systems with up to 2½″ piping and 58 m³/h (255 gpm) water flow.

B35TDW

B35TDW

The B35TDW targets applications such as boilers for tap water heating, transformer oil cooling, chiller and refrigeration desuperheaters, and heat recovery from air compressors. SWEP’s Double Wall technology ensures that liquids do not mix and makes any internal leaks visible – important factors in…

B400T

B400T

The B400T has been developed to work extremely effectively at high capacities, enabling compact solutions in demanding chiller applications.

B5T

B5T

The B5T enables efficient heat exchange in applications with small flows and extreme demands for compactness. Easy to install and use, the product is small yet versatile, which makes it a good choice for small oil or water coolers.

B60

B60

The optimized B60 is the market’s leading product for gas/liquid applications. It provides optimal heat transfer where the media have extreme volume differences. The asymmetric design of the channel plates enables the fluids to have different flow rates. The exchanger is also designed for optimal…